Last Updated: 1 August 2020

[LAT 11,870] Mudguards92 

92
(1) Mudguards must be provided for all the wheels on the front axle of every motor vehicle, other than a motorcycle, and must be so constructed as to—
  • (a)catch and deflect downward any stone, mud, water or other substance thrown upwards by the rotation of the wheels; and
  • (b)protect against contact with the upper half of the wheel or tyre.
(2) Mudguards must be provided for the rear wheels of every motor vehicle other than a motorcycle and trailer and must be constructed as follows—
  • (a)the width must not be less than the width of the tyre or tyres except that if the body is a tray type of width 2.2 m or more than the mudguard, must not be less than 380 mm in width;
  • (b)the mudguard must give protection at and above a point at a height above ground level not exceeding one-third of the distance such point is rearward of the centre of the axle or 230 mm whichever is the greater;
  • (c)the protection offered by the mudguard must be continuous to a point 30 degrees forward of the vertical centre line of the rear axle except on a motor vehicle used solely for the purpose of hauling a semi-trailer;
  • (d)the rear surface of the rear mudguards fitted to a tray type motor vehicle or trailer of width 2.2 m or more must be white or silver.
(3) Mudguards must be provided for the front and rear wheels of motorcycles and be so constructed that—
  • (a)the width is not less than the maximum width of the tyre;
  • (b)the front mudguard extends at least from a point vertically above the centre of the wheel rearwards to a point level with the centre of the wheel; and
  • (c)the rear mudguard extends at least from a point vertically above the centre of the wheel rearwards to a point 45 degrees above the horizontal line through the centre of the wheel.